Tektronix TM503 Power Module |
||
|
||
Tektronix TM503 Power Module Versorgung für drei Einschübe aus der 500er Serie |
||
Das Tektronix TM503 Power Modul ist eine Spannungsversorgung für maximal drei Einschübe aus der 500 er Serie. Beispielsweise lassen sich so ein Multimeter, ein Generator und ein Zähler zu einer kompletten Meßeinheit platzsparend zusammenschalten. Auch Oszilloskope sind in der 500 Serie gebaut worden. Zum Tauschen der Einschübe ist es empfehlenswert zuvor das Gerät auszuschalten, die sonst enstehende Funkenbildung reduziert die Lebensdauer an den Verbindungskontakten. Jedoch geht nichts an den Geräten kaputt, wenn trotzdem versehentlich ein Einschub unter Spannung eingesteckt oder gezogen wird. The Tektronix TM503 is a three-compartment mainframe for any combination of a 500 series plug-in. For example rear panel outputs may be added for specific applications, such as connecting the output of the ramp generator to the VCF input of the sweep generator. One or more TM503 may be rackmounted. The shown devices was mounted in an fixed testing system with the two aluminium holder. It's recommended that the TM503 be turned off before inserting or removing any module. Arcing at the connector terminals can reduce contact life. However, no internal damage will result if a module is inserted into a live Power Module. |
||
Some Characteristic:OPERATING CONDITIONS: operate in an ambient air temperature of 0°C to +50°C. Thermal cutout devices protect the system by disconnecting the power to the modul when internal temperatures rise above a safe operating level. These devices automatically return power to the unit when the internal temperature return to a safe level. LOADING and POWER CONSIDERATIONS: approximately up to 120 watts with three plug-in modules installed, depends on plug-in and operation mode. Universal Transformer 48 Hz to 440 Hz. Line voltage ranges 100, 110, 120, 200, 220, 240 VAC, all with 10%. Range changing for transformer accomlished with quick-change lineselector block. SUPPLIES (unregulated): Two 25VAC windings, 500mA each, supplied to each compartment, independently. +33.5V and -33.5V, 1A max. each supply, shared by all compartments. 17.5VAC and +11.5V, 3.6A maximum, shared in any combination between these two supplies and shared among all compartments. |
||
|
||
|
||