7A26 Amplifier Verstärker
Der 7A26 ist ein Zwei
Kanal Verstärker Einschub mit einer
Eingangsimpedanz von 1 Mohm 22pF und einer Bandbreite von 200 MHz.
Der
7A26 erreicht die Bandbreite in einem Mainframe, dessen Bandbreite noch
höher spezifiert ist z.B. 7904, 7834 oder 7104. Mit den 200
MHz lassen sich die meisten Messaufgaben problemlos erledigen. Weit
verbreiteter Verstärker.
The 7A26 is a Dual Channel Amplifier plug-in with an inut impedance of
1 Mohm 22pF. Bandwidth 200 MHz in some mainframe with also a high
bandwidth. This bandwidth is enough for most measurements. Common used
amplifier.
-
Calibrated Range 5mV/DIV to 5V/DIV
in 1,2,5
-
Deflection Factor Accuracy within
2% with gain adjusted at 10mV/DIV
-
Uncalibrated (Variable)
-
DC to 200 MHz vertical upper
Bandwidth depending from type of mainframe used.
-
Lower Bandwith (AC coupled) 10
hertz or less
-
Risetime 21ns maximum (depends on mainframe)
- Risetime for example in a 7904A mainframe - 1.8ns
-
Maximum Input Voltage DC coupled
250V, (DC+ Peak AC); AC component 500 volts peak-to-peak maximum, one
kilohertz or less.
-
Maximum Input Voltage 500 Volts,
(DC+ Peak AC); AC component 500 volts peak-to-peak maximum, one
kilohertz or less.
-
Channel Isolation 50:1 display
ratio up to 200 megahertz
-
Input resistance 1M +/-2%
-
Input capacitance 20pF+/-0.5pF SN
B208879-below and 22pF+/-0.5pF SN B208880-up
-
Common mode rejection ratio at
least 10:1, DC to 50MHz
- Delay time difference
between channels 200ps or less
![Tektronix 7A26 Verstärker Einschub](images/7A26_verstaerker_links.jpg)
![Tektronix 7A26 Verstärker Einschub](images/7A26_verstaerker_rechts.jpg)
![](images/7A26-2.jpg)
7A26 placed in a mainframe
![](images/7A26-4.jpg)
![](images/7A26-5.jpg)
![](images/7A26-3.jpg)
![](images/7A26-6.jpg)
![](images/7A26-7.jpg)
Eine kleine Besonderheit:
![](images/7A26-1.jpg)
Dieses Bild zeigt einen leider
bereits schon etwas ausgeschlachteten Einschub, den ich von jemandem
bekommen habe. Das Teil hat eine Auffälligkeit, die niedrige
Heerenveen Seriennummer 26, das kann gut sein, dass dies ein Einschub
vom ersten Produktionstag ist. Die vorangestellte 7 steht für den
Standort der holländischen Fertigung.
A unfortunately cannibalised Plug-in, got it from somebody, do you see
the low Heerenveen Serial Number of 26 ? May be it's a Plug-in ot
the first day production. Pre 7 stands for Heerenveen.